magayo 3D4D Software Documentation

In any lottery game, there are trends that you can identify to help you improve your chances of winning. These trends vary for different games and it will also vary over time for the same game.

To look for trends, you will need to identify the minimum and maximum thresholds for a fixed time bucket, or number of draws, over a period of time by iterating into the history of the game.

The minimum threshold is the most frequent lowest occurrence while the maximum threshold is the most frequent highest occurrence.

Any statistics below the minimum threshold are likely to be drawn in the coming draws while any statistics above the maximum threshold are unlikely to be drawn in the next draw,

magayo 3D4D will recommend to you the optimal time bucket to use in the analysis. This time bucket varies for different games depending on the number of numbers drawn in each draw. magayo 3D4D will then iterate into the history of the game to look for the trends. In each iteration, magayo 3D4D will identify the minimum and maximum thresholds based on the defined time bucket.

For example, if the time bucket is set at 10 draws, magayo 3D4D will look at the statistics based on 10 draws in each iteration, starting from the most recent draw to 10 draws ago. In the next iteration, magayo 3D4D will look at the next 10 draws in the past.

Hence, it is important to note that if the time bucket is 10 draws, it does not imply that magayo 3D4D only uses the last 10 draws in the analysis because magayo 3D4D will iterate many times into the history of the game.

The defined time bucket is used in the Short Term analysis. The Medium Term analysis uses twice the number of draws in the Short Term analysis and the Long Term analysis uses twice the number of draws in the Medium Term analysis.

For example, if the time bucket is set at 10 draws, the Short Terms analysis uses 10 draws as the time bucket, the Medium Term analysis uses 20 draws as the time bucket and the Long Term analysis uses 40 draws as the time bucket.

Besides looking for the thresholds, magayo 3D4D will also analyze the patterns in the different statistics to identify the maximum lapse and maximum consecutive draws.

The maximum lapse is the most frequent longest number of draws since the same number is drawn again while the maximum consecutive draws is the most frequent successive draws in which the same number is drawn.

Any numbers with lapse above the maximum lapse are likely to be drawn in the coming draws while numbers above the maximum consecutive draws are unlikely to be drawn in the next draw.

This function allows you to define the parameters to be used in the analysis. Configuring the parameters is only possible in the Pro Edition.

We recommend that you use the default parameters as these values are automatically set by magayo 3D4D based on the rules of each game and the number of draws in the database.

Under the "Parameters" tab, select the prizes to include in the analysis. This selection is only applicable for games that have more than 1 number drawn in each draw.

Select the number of draws to be used as the time bucket in the Short Term analysis.

The recommended time bucket is set as the default value. If there are insufficient draw results in the database, a constrained time bucket will be used as there are not enough historical draws for magayo 3D4D to iterate and identify the trends.

The time bucket is set to "10" in the Free Version.

As explained in the earlier section, if the time bucket is 10 draws, it does not imply that magayo 3D4D only uses the last 10 draws in the analysis because magayo 3D4D will iterate many times into the history of the game.

You can further select the date for the analysis to end if you would like to test the analysis and then compare your analysis against the actual drawn numbers. The default date is the current date. This implies that the analysis will end on the most recent draw in the database.

By changing the analysis end date to be earlier than an existing draw in the database, you can test and compare the results of the analysis against the actual numbers drawn in the very next draw after the analysis end date.

If you would like magayo 3D4D to recommend less numbers, you can select the "Recommend less numbers" checkbox.

Select the number of tickets you would like magayo 3D4D to generate.

Click the "Analyze" button to proceed with the analysis.

Should you need to change the parameters and analyze again, it is necessary to exit from the "Analyze & Recommend" window first. This is a conscious design as we do not encourage you to continuously analyze using different parameters. By doing so, you will likely be overwhelmed by all the data, become confused and have difficulty deciding on which numbers to play.

We recommend that you decide on your parameters first, analyze once and then proceed to play the tickets generated.

Once the analysis is completed, you can view the analysis under the different tabs. You can also export the statistics, the pattern, the recommended numbers and the generated tickets.

The Free Version does not allow you to change any parameters or export any data.

This parameter under the "Parameters" tab allows you to view the different analysis and it is only enabled after the analysis by magayo 3D4D is completed.

The different analysis are as follows:

Straight Frequency
Shows the number of times drawn for an exact match of each number.

Front 2 or Front 3 Frequency
Shows the number of times drawn based on the first 2 digits (Front 2) or the first 3 digits (Front 3) of the numbers drawn.

Back 2 or Back 3 Frequency
Shows the number of times drawn based on the last 2 digits (Back 2) or the last 3 digits (Back 3) of the numbers drawn.

Odd Even Frequency
Shows the number of times drawn for each combination of odd and even digits drawn in a draw.

Low High Frequency
Shows the number of times drawn for each combination of low and high digits drawn in a draw.
The digits 0 to 4 are low numbers while the digits 5 to 9 are high numbers.

Root Sum Frequency
Shows number of occurrences for each root sum of the numbers drawn. Root sum, or digital root, is the single digit value from 1 to 9 obtained by repeatedly summing the digits in the number drawn until a single-digit number is reached.
For example, the number "368" has the root sum = 3+6+8 = 1+7 = 8.

Sum Frequency
Reflects the number of occurrences based on the sum of the digits of the number drawn.
For example, the number "368" has the sum = 3+6+8 = 17.

Width Frequency
Shows the number of times drawn based on the width of the numbers drawn. The width is the difference between the biggest digit and the smallest digit in the number drawn.
For example, the number "368" has the width = 8-3 = 5.

Box Frequency
Shows the number of times drawn for all permutations of the numbers drawn.

Box Group Frequency
Shows the number of times drawn for each permutation group.

In each analysis, you can click the "Export Statistics" button to export the statistics under the "Statistics" tab to a CSV (comma-separated) file. You can also click the "Export Pattern" button to export the patterns under the "Pattern" tab to a CSV file. You can open the CSV file using Excel or any text editor.

This parameter under the "Parameters" tab allows you to view the Short Term analysis, Medium Term analysis or the Long Term analysis. It is only enabled after the analysis by magayo 3D4D is completed.

The "Statistics" tab shows you the detailed analysis in a tabular format. The columns shown are dependent on the analysis selected.

Permutation column
Shows the number of permutations.

Current Lapse column
Shows the current lapse, which is the number of draws passed since the number is drawn.

Min column
Shows the minimum threshold identified based on all the draws in the database.

All Draws column
Shows the frequency or occurrences based on all the draws in the database.

Max column
Shows the maximum threshold identified based on all the draws in the database.

Odd & Even column
Shows the odd and even combination of the number.

Low & High Even column
Shows the low and high combination of the number.

Root Sum column
Shows the root sum of the number.

Sum column
Shows the sum of the number.

Width column
Shows the width of the number.

ST Min column
Shows the minimum threshold identified in the short-term horizon.

ST Freq column
Shows the frequency or occurrences in the short-term horizon.

ST Max column
Shows the maximum threshold identified in the short-term horizon.

MT Min column
Shows the minimum threshold identified in the medium-term horizon.

MT Freq column
Shows the frequency or occurrences in the medium-term horizon.

MT Max column
Shows the maximum threshold identified in the medium-term horizon.

LT Min column
Shows the minimum threshold identified in the long-term horizon.

LT Freq column
Shows the frequency or occurrences in the long-term horizon.

LT Max column
Shows the maximum threshold identified in the long-term horizon.

You can click on any column header to sort the statistics in ascending or descending order based on the column that you have clicked.

The "Chart" tab presents the statistics for each analysis and selected time period in a graphical chart.

The chart is not available for the Straight Frequency, Front 2 or 3 Frequency, Back 2 or 3 Frequency and Box Frequency because there will be too many bars. If the chart is shown, it will not be clearly visible and meaningful.

The "Pattern" tab shows the pattern for each analysis through the Long Term horizon.

The maximum consecutive draws and the maximum lapse identified in the Short Term horizon are also shown at the bottom of the window. The Short Term period is used for identifying the maximum consecutive draws and the maximum lapse because patterns usually change continuously over time.

The pattern is not available for the Straight Frequency, Front 2 or 3 Frequency, Back 2 or 3 Frequency and Box Frequency because there will be too many columns. If the pattern is shown, you will need to scroll horizontally and vertically and it will not be user-friendly.

Based on the selected parameters, magayo 3D4D will analyze every statistics, eliminate those numbers that are unlikely to be drawn in the next draw and recommend you a smaller pool of numbers to play.

The accuracy of the recommendation is dependent on the number of draws in the database as well as any changing trends and patterns.

The improvement in the chances of winning are also calculated and shown.

The "Tickets" tab shows the tickets generated by magayo 3D4D.

For every ticket, magayo 3D4D will also display the occurrences in the last 10 years.

The Free Version will generate 30 tickets.